Rugged sender products that interface with Datcon brand instruments

FUEL SENDERS: (Available Part Numbers)

Full line of regular- and heavy-duty fuel senders for O.E.M. applications · Fixed or adjustable (6"-24"), · Electrical "match" (resistance) is 240-33.5 · Available in common flange ground with #10-32 sender terminal stud or isolated ground version with #10-32 ground & sender terminal stud · Sender "kits" include sender, gasket & hardware · SAE 5-hole flange configuration for tank openings of 1.65" (+/- .02") · Regular-duty ("slim-line") senders fit tank openings as small as 1.35" (+/- .02") · Two fuel sender mounting configurations are available, each with two mounting positions for flange orientation · Custom lengths; flanges; integral fuel pick-up, return & venting tubes; calibrations; electrical "matches"; & floats

See also IntelliSensor^® section for full line of electronic liquid (hydrocarbon-based) measuring systems (e.g. fuel sensors). IntelliSensor^® part number listing.

TEMPERATURE SENDERS: (Available Part Numbers)

Full line of economically priced temperature senders available in Datcon "high", "low" & "extra high" range matches · Temperature ranges up to 240°F & 320°F · Thread sizes: 1/8"-27 NPTF, 1/4"-18 NPTF, 3/8"-18 NPTF, 1/2"-14 NPTF, 5/8"-18 NPTF, M14 x 1.5, M16 x 1.5, & M18 x 1.5 · "Universal" sender kit includes 1/4"-27 NPTF sender & 1/4", 3/8" & 1/2" adapters · #10-32 terminals · Thermally isolated senders available with 1/2"-14 NPTF & 9/16"-18 NPTF thread mountings · Dual-station units available in Datcon high or low range (to drive two separate gauges) · Consult with factory for isolated ground options & other electrical "matches"

OIL PRESSURE SENDERS: Available Part Numbers)

Full line of regular-, heavy- & severe-duty oil pressure senders for O.E.M. applications · Standard pressure ranges from 40 to 400 psi · Electrical "match" (resistance) is 240-33.5ohms · Fully sealed & dust-proof heavy- & severe-duty units · Thread sizes: 1/8"-27 NPTF, 1/4"-18 NPTF & M10 x 1.0 · #10-32 terminals · Common ground through mounting thread · Severe duty senders (80, 100, 125 & 150 psi) assure desired performance in high shock & vibration environments · Dual-station units available (to drive two separate gauges) · Consult with factory representatives or your distributor for isolated ground options & other electrical "matches"

SPEED SENSORS: (Available Part Numbers)

Four standard magnetic sensors: 3/4"-16 threads, 1.9" & 3.4" long & 5/8"-18, 1.9" & 3.4" · Air gap to gear tooth 0.03" · Corrosion-resistant anodized aluminum housing · Two pulse generators: 16-pole, 7/8"-18 UNS & 60-pole, 7/8"-18 UNS · Four drive tangs for 16-pole pulse generator: .104", .152", .188" & .203"; four drive tangs for 60-pole pulse generator (same sizes)

For more information contact sales@datcon.com